Lug-All 1-1/2 Ton Medium Frame Cable Puller / Ratchet Lever Hoist
CAPACITY for DOUBLE LINE: 1-1/2 Ton, 3,000 Lbs., Handle Pull for Full Load: 100 Lbs., Lifting Distance: 15’, Minimum distance between hooks: 23.5”.
CAPACITY for SINGLE LINE: 1,500 Lbs., Handle Pull for Full Load: 97 Lbs., Lifting Distance: 30’, Minimum distance between hooks: 18”.
Cable Diameter: 7/32”, Cable Length: 31.5’, Weight: 13.75 Lbs.
A Medium frame cable ratchet lever hoist from LUG-ALL offers longer self-storing cables for when longer reach is needed. It has a lightweight portable design weighing only 13 ¾-15 ½ pounds with capacities ranging from 1-½ to 2 tons. There are six models of our medium frame cable ratchet lever hoist (comealong) available with a variety of options.
Capacities- rated loads of 1125, 1500, 2000, and 3000 pounds single line; 1500, 2250, 3000, and 4000 pounds double line
Cable lengths- medium frame cable lengths on a LUG-ALL cable ratchet lever hoist range from 22 feet to 39 ½ feet depending on the puller capacity
Open Frame Design- allow daily visual inspection and cleaning of your cable ratchet lever hoist
360º Swivel Hooks- drop forged steel hooks with latches are standard on LUG-ALL cable ratchet lever hoists
Exclusive Swaged Ball Shank Terminal- locks the cable on the drum of the cable come-along and allows for full cable extension
Reversible Handle- will bend at an average of 20-50% overload, warning operator to back off of the load before serious injury or damage to the operator or hoist
Double Locking Pawl System- allows for no load brakes to slip or fowl on the LUG-ALL cable ratchet lever hoist. Positive load holding in ALL environments
Drop forged steel hooks with latches (360º swivel) are the standard hooks on LUG-ALL cable ratchet lever pullers. Other hook styles are available for the LUG-ALL cable puller comealong to meet your application requirements.
The marine grade option on the cable ratchet lever hoist models includes anodized castings, stainless steel cables, and cadmium plated steel shafts. Marine grade LUG-ALL pullers use the same model numbers as our standard cable hoists with the suffix “M”.
The rapid lowering feature on a cable puller / cable ratchet lever hoist permits release of the load four times faster. After lowering four times faster, you can switch back to one tooth lowering for positioning by flipping a lever on the frame. This option is noted with the letter “R” on the specification chart. The cable return crank attaches directly to the drum shaft for slack cable take up.