Shaw Box 15-Ton World Series Wire Rope Hoist with 25’ Lift and Motorized Trolley, Dual Speed, 3-Phase Power
This item has been discontinued. For a replacement hoist, feel free to give us a call at (866)-464-7871.
Manufacturer: Shaw Box, Capacity: 15-Ton, Lift: 25 Feet, Hoist Speed (Dual): 18/4.5 FPM, Motor HP: 20/5, Motor RPM: 3600/900, No. Ropes: 4, Rope Dia.:15 mm, Suspension: Motor Trolley, Trolley Speed (Dual): 50/17 FPM, Wheel Qty: 4, Wheel Dia.: 7.0", Trolley for I-Beam Flange Width: 8.0" to 20" (Advise at time of order), Voltage: 208-3-60, 230-3-60, 460-3-60, 575-3-60 or 380-3-50 (Advise at time of order), Does NOT include Pushbutton Controls or Power Cord, Weight: 2,830 Lbs.
Shaw-Box World Series Monorail Hoist & Trolley
Capacities: 1 to 20 Tons Lift: Maximum 60 ft.
Shaw-Box World Series monorail hoists are low-headroom, heavy-duty hoists built to provide long life with higher lifting speeds and precise positioning control. These electric wire rope hoists feature a two-speed motor and oil-bath-lubricated, triple-reduction gearing.
Features & Benefits:
Triple reduction hoist gearing is oil bath lubricated, operating in an oil-tight, cast aluminum gear case.
2-Speed Motor with a 4:1 ratio from high to low speed. Low speed provides precise load handling, while high speed allows for fast throughput.
Machined Wire Rope Drum made of quality steel and deep-grooved with a rope guide to help ensure the rope stays in the grooves.
Reeved to a low-headroom lower block for minimum headroom and maximum lift.
Wire rope is secured to the drum with 3 heavy, ductile iron clamps and designed to have 3 extra wraps of wire rope on the drum with the rope at full extension (low hook).
Bearing-mounted trunnion hook rotates 360 degrees and swings back and forth 180 degrees for easier load adjustment.
Upper/lower geared limit switches.
Overcapacity limit switch prevents the hoist from lifting excessive overloads.
Two wheels, one driven on each side of the frame, for maximum traction and uniform tracking.
Hoist and trolley controls are housed in a common NEMA 4/12 enclosure with hoist motion monitor, motor thermal overloads, over capacity limit switch and more.
An additional block-operated upper control circuit limit switch is optional.
Electronic Hoist Monitoring Card: Hoist comes standard with Pulse™ Monitor Card that records key information that can simplify troubleshooting and help reduce maintenance costs.