866-464-7871
704-985-1110
Monday - Friday
8:30 AM to 6:00 PM EST
  • Coffing 1/2-Ton Wire Rope Hoist, 50' Lift, Motor Trolley, 1-Phase photo

Coffing ½-Ton Wire Rope Hoist with 50’ Lift, and Motorized Trolley, Single Phase Power.

SKU: WRMT1016-50-1
$7,751.00

This item has been discontinued. For a replacement hoist, feel free to give us a call (866)-464-7871. 

Manufacturer: Coffing Hoist, Capacity: 1/2-Ton,  Lift: 50 Feet, Suspension: Motorized Trolley, Trolley Fits: 3.33" to 7.0" Wide Flange, Hoist Speed: 16 FPM, Trolley Speed: 35 FPM, Pendant Drop: 46 Feet, Headroom: 22-13/16”, Voltage: 115/230-1-60,  Hoist Motor HP: 1/2 HP, Rope Diameter: 1/4",  Single Reeved,  Weight: 327 Pounds

 

PDF: 

Features of a Coffing Wire Rope Hoist:

Highly Rigid Tubular Steel Frame

Easy Access to All Electrical Connections

Dual Articulating Trolley Lugs

Threaded Power Cord Entry (Weather Tight)

Steel Machined Groove Drum

Precision Machined Alloy Steel Gears

First Stage Helical Gearing

Multiple Disc Motor Brake

Adjustable Upper and Lower Limit Switches

Mechanical Load Brake

Standard Overload Clutch

Fully Enclosed Bottom Block

Ergonomic Push Button Control

Internal Strain Relief Capacities & Lift – Rated loads from ½ to 5 tons, with lifts from 15 ft. to 70 ft. based on models.  Standard push button drop is 4 ft. less than lift.
Voltages & Motor Options – 115/230 (single phase); 230/460, 208, 220/380, 575 (three phase) 60 hertz or 50 hertz.  Two-speed motors available (3 to 1 speed ratio). 
Reeving Options – WR Models are available with 2-part standard; 4-part standard; True Vertical Lift; and Low Headroom options. 
Suspension Options – Hoist can be Lug, Plain, Geared, or Motorized Trolley mounted.  *Contact Hoists Direct Inc 866-HOISTS1 or email [email protected] for Lug or Geared Suspension Options* 
Adjustable Limit Switch – Regulate upper and lower load travel.  Stainless steel and brass components provide exceptional repeatability and positioning. 
Oil Bath Transmission – Gears are precision machined of alloy steel and run in an oil bath for longer, quieter operation. 
Small Frame Design – Features housings of cast aluminum alloy construction for minimum weight.  Engineered and designed for use with motors up to 1 HP. 
Large Frame Design – Features load bearing housings of ductile iron construction for maximum strength.  Non-load bearing housings of cast aluminum alloy for minimum weight.  Engineered and designed for use with higher torque 2 and 3 HP three phase motors.
Machined Steel Drum – Precision grooves are machined to a depth 50% of the wire rope diameter.

VFD Option – Under-the-cover Variable Frequency Drives offer In-field, instant programming – from infinitely variable (12:1 speed ratio) to any intermediate, predetermined speed range.  VFD’s can also be externally mounted to Motorized Trolley Units. 
Other Options & Accessories – Corrosion resistant stainless steel wire rope available. *Contact Hoists Direct Inc 866-HOISTS1 or email [email protected] for Stainless Steel Wire Rope Options*