Coffing ½-Ton Wire Rope Hoist with 25’ Lift, and Motorized Trolley, Single Phase Power.
This item has been discontinued. For a replacement hoist, feel free to give us a call (866)-464-7871.
Manufacturer: Coffing Hoist, Capacity: 1/2-Ton, Lift: 25 Feet, Suspension: Motorized Trolley, Trolley Fits: 3.33" to 7.0" Wide Flange, Hoist Speed: 16 FPM, Trolley Speed: 35 FPM, Pendant Drop: 21 Feet, Headroom: 22-13/16”, Voltage: 115/230-1-60, Hoist Motor HP: 1/2 HP, Rope Diameter: 1/4", Single Reeved, Weight: 301 Pounds
Features of a Coffing Wire Rope Hoist:
Highly Rigid Tubular Steel Frame
Easy Access to All Electrical Connections
Dual Articulating Trolley Lugs
Threaded Power Cord Entry (Weather Tight)
Steel Machined Groove Drum
Precision Machined Alloy Steel Gears
First Stage Helical Gearing
Multiple Disc Motor Brake
Adjustable Upper and Lower Limit Switches
Mechanical Load Brake
Standard Overload Clutch
Fully Enclosed Bottom Block
Ergonomic Push Button Control
Internal Strain Relief Capacities & Lift – Rated loads from ½ to 5 tons, with lifts from 15 ft. to 70 ft. based on models. Standard push button drop is 4 ft. less than lift.
Voltages & Motor Options – 115/230 (single phase); 230/460, 208, 220/380, 575 (three phase) 60 hertz or 50 hertz. Two-speed motors available (3 to 1 speed ratio).
Reeving Options – WR Models are available with 2-part standard; 4-part standard; True Vertical Lift; and Low Headroom options.
Suspension Options – Hoist can be Lug, Plain, Geared, or Motorized Trolley mounted. *Contact Hoists Direct Inc 866-HOISTS1 or email [email protected] for Lug or Geared Suspension Options*
Adjustable Limit Switch – Regulate upper and lower load travel. Stainless steel and brass components provide exceptional repeatability and positioning.
Oil Bath Transmission – Gears are precision machined of alloy steel and run in an oil bath for longer, quieter operation.
Small Frame Design – Features housings of cast aluminum alloy construction for minimum weight. Engineered and designed for use with motors up to 1 HP.
Large Frame Design – Features load bearing housings of ductile iron construction for maximum strength. Non-load bearing housings of cast aluminum alloy for minimum weight. Engineered and designed for use with higher torque 2 and 3 HP three phase motors.
Machined Steel Drum – Precision grooves are machined to a depth 50% of the wire rope diameter.
VFD Option – Under-the-cover Variable Frequency Drives offer In-field, instant programming – from infinitely variable (12:1 speed ratio) to any intermediate, predetermined speed range. VFD’s can also be externally mounted to Motorized Trolley Units.
Other Options & Accessories – Corrosion resistant stainless steel wire rope available. *Contact Hoists Direct Inc 866-HOISTS1 or email [email protected] for Stainless Steel Wire Rope Options*