INDUSTRIES SERVED: ·
Construction·
Demolition ·
Masonry ·
Restoration ·
Stucco ·
Scaffolding All Beta Max Hoists models meet or exceed OSHA
and ANSI specifications
·
Beta Max redefined accessible with our High Speed Wire Rope
Hoists, accessories, and mounting optionsthat are
guaranteed to make your job and jobsite safer and more
productive.
·
Confined and hard to reach spaces made easy with a portable
hoist.
·
With seven construction hoists to choose from, you can move 200
to 2000 lbs. of materials over 400 ft. to access virtually any
job level.
·
Portable scaffold hoists install easily on existing scaffold
systems, work platforms, I-Beams, and rooftop mounting options.
They give the ability to control your workflow, schedule and
budget with the most efficient and safe material delivery to any
work level. Perfect for use as a masonry hoist, glazing hoist,
stucco hoist or monorail hoist.
·
All Beta Max Hoists Systems meet or exceed ANSI and OSHA
specifications.
Portable Hoist Safety Features
· Water
Tight Connectors
· Easy
Cable Replacement (Beta Max provides clamps and crimp)
· Failsafe
brake holds the load securely when not lifting or lowering-
loads are powered up and down
· Non-rotating
cable helps keep loads from spinning
· Upper-limit
Switch Assembly stops the hoist instantly when activated
· Sturdy
Electrical Controller equipped with thermal overload sensing
device
Featuring Glass Master
Hoist
·Glazing
and Curtain Wall Solutions·
The Leo Hoist Series is commonly used by contractors who
place glass, unitized curtain wall, cladding, solar panels,
architectural panels and exterior finish systems (EFS) a
number of speed settings that make lifting delicate
materials easier and safer.
Perfect for
Light Weight, smaller projects in confined spaces.
Payload 400 lbs
Height 80’ – 160’
Speed 80 fpm
Power: Choose from 110v - 15amp - 1 Phase
Horsepower: 1 HP
6ft. Pendant Cable and 3 ft. Power Cable
Unit Weight 95 lbs
Very mobile on a jobsite due to super light 95 lb
weight.
Installs easily on existing scaffold systems, work
platforms, I-Beams, and rooftop mounting options.
Optional Vertical Post Mounting System easily
attaches to the leg of scaffolding and pivots 180°,
allowing convenient loading and unloading of
materials at any work level.
Mounting Options: I-Beam Trolley, Mac-Trac,
Scaff-Trac, Trestle Monorail, and Vertical Post.
SCORPIO
PLUS/ XL PORTABLE HOISTS
Our prices include
shipping
within the lower 48 States.
220v
- 15amp - 3 Phase (*cannot be field converted)
Horsepower: 1 Phase: 2 HP, 3
Phase: 3.3 HP
6ft. Pendant Cable and 3 ft.
Power Cable
Wireless Control Options
Available
Unit Weight 200 - 220 lbs
Installs easily on existing
scaffold systems, work platforms, I-Beams, and
rooftop mounting options.
Optional Scaff-Trac Mounting
System provides a standardized and complete lifting
solution engineered for easy installation every
time.
Flexible I-Beam Mounting
Option works with and configures to each unique
jobsite.
Mounting Options: Fixed
I-Beam, I-Beam Trolley, Scaff-Trac, and Trestle
Monorail.
Featuring Glass Master
Hoist
·Glazing
and Curtain Wall Solutions·
The Leo Hoist Series is commonly used by contractors who
place glass, unitized curtain wall, cladding, solar panels,
architectural panels and exterior finish systems (EFS) a
number of speed settings that make lifting delicate
materials easier and safer.
The Leo Series is designed in compliance with current safety
regulations and comes equipped numerous features that ensure
optimum safety and maximum control when lifting materials in the
construction and glazing industries. The Leo hoist is
commonly used for installations of unitized curtain wall,
cladding, solar panels, architectural panel and exterior finish
system (EFS) installation projects.
All Leo hoists are equipped with a push button pendant and upper
limit switch assembly, enabling secure and easy up and down
movement that instantly stops when the upper limit switch is
activated. The hoist contains a non-rotating cable to help keep
loads from spinning while lifting and lowering, and features
fail-safe conical brakes to hold the load securely when the
hoist is not actively transporting material.
Our Leo glazing hoist is a specialty hoist system that features
an integrated Variable Frequency Drive Controller (VFD).
The Leo Series offers contractors who place glass, unitized
curtain wall, cladding, solar panels, architectural panels and
exterior finish systems (EFS) a number of speed settings that
make lifting delicate materials easier and safer. Additionally,
the Leo hoists include a sturdy electrical controller with an
overload-sensing device to protect the motor from damage caused
by overwork or poor power supply. Soft start and stop
capabilities make the hoists perfect for maneuvering fragile
products, and operators are able to lift materials as delicate
as glass panels in finite increments and set them down without
causing damage to the product.
LEO/ LEO XXL PORTABLE HOISTS
Our prices include
shipping
within the lower 48 States.
The Leo Hoist Series is commonly used by contractors who
place glass, unitized curtain wall, cladding, solar panels,
architectural panels and exterior finish systems (EFS) a
number of speed settings that make lifting delicate
materials easier and safer.
The Leo Series is designed in compliance with current safety
regulations and comes equipped numerous features that ensure
optimum safety and maximum control when lifting materials in the
construction and glazing industries. The Leo hoist is
commonly used for installations of unitized curtain wall,
cladding, solar panels, architectural panel and exterior finish
system (EFS) installation projects.
All Leo hoists are equipped with a push button pendant and upper
limit switch assembly, enabling secure and easy up and down
movement that instantly stops when the upper limit switch is
activated. The hoist contains a non-rotating cable to help keep
loads from spinning while lifting and lowering, and features
fail-safe conical brakes to hold the load securely when the
hoist is not actively transporting material.
Our Leo glazing hoist is a specialty hoist system that features
an integrated Variable Frequency Drive Controller (VFD).
The Leo Series offers contractors who place glass, unitized
curtain wall, cladding, solar panels, architectural panels and
exterior finish systems (EFS) a number of speed settings that
make lifting delicate materials easier and safer. Additionally,
the Leo hoists include a sturdy electrical controller with an
overload-sensing device to protect the motor from damage caused
by overwork or poor power supply. Soft start and stop
capabilities make the hoists perfect for maneuvering fragile
products, and operators are able to lift materials as delicate
as glass panels in finite increments and set them down without
causing damage to the product.
LEO/ LEO XXL VFD PORTABLE HOISTS
Our prices include
shipping
within the lower 48 States.
Easily attaches to Trestle Monorail and Scaff-Trac systems with
tubular clamps.Use
with 50 lb suspended staging counterweights.
*COUNTERWEIGHTS NOT INCLUDED
Options: Featuring Swivel clamps use with traditional
scaffolding legs – Weight 60 lbs or
Our most
flexible and versatile mounting system is used with all of our
LARGE capacity hoists. The addition of a rolling I-Beam Trolley
Top allows many Beta Max Hoists to adapt to existing I-Beams. If
the horizontal trolley is not necessary Beta Max offers a Fixed
I-Beam Top which firmly holds the hoist stationery on the
I-Beam. Max. Load Lift - 2000 lbs. Headroom - 31.25"
The Fixed
I-Beam Mount is used with scaffold hoists to hold loads steady
while lifting materials to the job level. The mounting system
can be mounted on virtually any standard I-Beam on a jobsite.
Max. Load Lift - 2000 lbs.
Gemini
Plus Leo
Leo XXL
Leo XXL
Leo VFD
Leo XXL VFD
Our most
flexible and versatile mounting system is used with all of our
SMALLER capacity hoists. The addition of a rolling I-Beam
Trolley Top allows many Beta Max Hoists to adapt to existing
I-Beams. If the horizontal trolley is not necessary Beta Max
offers a Fixed I-Beam Top which firmly holds the hoist
stationery on the I-Beam. Max. Load Lift - 2000 lbs. Headroom -
26.43"
Our most
popular mounting system attaches in minutes, with no tools, to
existing scaffolding and is used with all Beta Max hoists. 7ft
length track are design to fit 7ft and 8ft spacing. Unlimited
system lengths are available using add-on 7 ft.or 8ft Scaff-Trac
extensions. Max Load Lift - 1200 when used w/ conventional
scaffolding. Outward Cantilever - 3.2 ft. Headroom - 31.00"
Our
heavy-duty mounting system is perfect for our large capacity
hoists. This mount is easily installed for between-the-floor or
rooftop lifting, but must be properly counterbalanced. To
Include: 60-33 & 60-41 Max. Load Lift - 1200 lbs. Outward
Cantilever - 3.5 ft. Headroom - 31.00"
The Mac-Trac is
especially designed for mason's type scaffold frames and is
specified with our Scorpio Plus Hoist. The Mac-Trac offers
perpendicular mounting to the building and can carry up to 500
lbs. The cross brace is removed at the hoist level and replaced
with a horizontal support bar. Max. Load Lift - 500 lbs.
Our simplest
mounting system is perfect for attaching our lighter weight
hoist to existing scaffolding. This mount pivots 180 degrees,
allowing convenient unloading at work level. Max. Load Lift -
400 lbs. Headroom - 19.75"
The Mac-Trac is
especially designed for mason's type scaffold frames and is specified
with our Scorpio Plus Hoist. The Mac-Trac offers perpendicular mounting
to the building and can carry up to 500 lbs. The cross brace is removed
at the hoist level and replaced with a horizontal support bar.
