Return to Home Page

Series 477 Helical/Worm Gear
Power Winches

Up to 2000 lb capacity
  • Machine Cut Gears for accurate and long lasting
    service.
  • Enclosed Oil Bath provides continuous lubrication
    of gears to minimize wear. Oil seals keep oil in and
    dirt out.
  • Internal Mechanical Brake for positive load control.
  • Cast Aluminum construction for lightweight
    strength, with durable paint finish to resist corrosion.
  • Ball Bearings ensure smooth and efficient operation.
  • Series 4777 is designed with a 4 inch wide drum for
    tight fleet angle installations.
  • Accessory Options include limit switches, cable
    pressure plates, torque limiting controls, and manual
    overrides.
  • Large Diameter Drums minimize wear to the wire
    rope and help extend its life.
  • Mounting Options include floor, wall, or ceiling.
  • Two-year Limited Warranty
Series 477 Helical - Worm Gear Power Winches
Single Phase 115 and 230 Volt  / Pneumatic / Hydraulic
Up to 2000 lb Capacity*
Our prices include  shipping within the lower 48 States.
Model No. Description Voltage Power Cord with Plug (ft) Pendant Control (ft) Drum Width (in) Capacity (lbs)   HP Approx. Ship Weight (lbs) List Price Our Price
4771A Helical-Worm Gear Power Winch - Includes Controls and Power Cord 115 1 phase 8 6 6 2000 lb
1.2 hp
88 $1,890 $1,796 Add To Cart
4771AC-1PH*A Helical-Worm Gear Power Winch - No Controls or Power Cord - Sold Separately 115 1 phase 0 0 6 2000 lb
1.2 hp
87 $1,815 $1,724 Add To Cart
4771AC-1PH2*A Helical-Worm Gear Power Winch - No Controls or Power Cord- Sold Separately 115 1 phase 0 0 6 2000 lb
1.5 hp
115 $1,960 $1,862 Add To Cart
4771AC-1PH2*B Helical-Worm Gear Power Winch - No Controls or Power Cord- Sold Separately 230 1 phase 0 0 6 2000 lb
1.5 hp
115 $1,960 $1,862 Add To Cart
4771AC-3PH*D Helical-Worm Gear Power Winch - No Controls or Power Cord- Sold Separately 230 3 phase 0 0 6 2000 lb
1.5 hp
111 $1,935 $1,838 Add To Cart
4771AC-3PH*E Helical-Worm Gear Power Winch - No Controls or Power Cord- Sold Separately 460 3 phase 0 0 6 2000 lb
1.5 hp
111 $1,935 $1,838 Add To Cart
                     
4771DC Helical-Worm Gear Power Winch - Includes Controls 12 VDC 0 10 6 2000 lb
1.0 hp
105 $2,545 $2,418 Add To Cart
4771PN Helical-Worm Gear Power Winch - No Controls or Power Cord - Sold Separately Pneumatic 0 0 6 2000 lb
1.2 hp
70 $2,015 $1,914 Add To Cart
4771HY Helical-Worm Gear Power Winch - No Controls or Power Cord - Sold Separately Hydraulic 0 0 6 2000 lb
2.3 hp
72 $2,275 $2,161 Add To Cart
    1                
4777A Helical-Worm Gear Power Winch - Includes Controls and Power Cord 115 1 phase 8 6 4 2000 lb
1.2 hp
93 $2,130 $2,024 Add To Cart
4777DC Helical-Worm Gear Power Winch - Includes Controls 12 VDC 0 10 4 2000 lb
1.0 hp
105 $2,915 $2,769 Add To Cart
* Wire Rope Assembly Sold Separately

For Unit Dimensions and Specification Click Here


 

*Order controls separately, see Electric Drum Control Switches below.
Our prices include  shipping within the lower 48 States.
Model No. Description Approx. Ship Wt. (lbs.) List Price Our Price
477PN-CNTRL Pneumatic control valve (not mounted or plumbed, no hoses) 6 $458 $435 Add To Cart
477PN-HS6 6ft hoses for pneumatic controls (not mounted) 4 $112 $106 Add To Cart
477HY-CNTRL Hydraulic control valve (not mounted or plumbed, no hoses) 5 $406 $386 Add To Cart
477HY-HY-HS6 6ft hoses for hydraulic controls (not mounted) 4 $99 $94 Add To Cart

 

ELECTRIC DRUM CONTROL SWITCHES
Drum control switches for 115 volt single phase motors up to 1.5hp, includes 8 ft power cord with grounded plug.
Please specify voltage, phase, and motor hp when ordering.  
Our prices include  shipping within the lower 48 States.
Model Number Description Voltage/Phase/Hertz with maximum rated motor hp Approx. Ship Wt. (lbs.) List Price Our Price
115/1/601 230/1/60 230/3/60 460/3/60
10L2A1 NEMA 1 to 1.5 hp to 2 hp to 3 hp to 3 hp 3 $375 $356 Add To Cart
10L7E1 NEMA1 to 1.5 hp to 3 hp to 5 hp to 7.5 hp 3 $526 $500 Add To Cart
                   
10L2A4 NEMA4 - watertight to 1.5 hp to 2 hp to 3 hp to 3 hp 7 $583 $554 Add To Cart
10L7E4 NEMA4 - watertight to 1.5 hp to 3 hp to 5 hp to 7.5 hp 7 $962 $914 Add To Cart
                   
10P1A46 6 FT Pendant control to 1 hp - - - 5 $312 $296 Add To Cart
*Actual drum capacities may be 25-30% less, due to non uniform winding. Tension in wire rope will also affect drum capacity.
*For Pneumatic, Hydraulic, and DC models, line speed is based on rated load, actual line speed varies with load weight and power supply.
*Model 4771PN, ratings are for 80cfm at 100psi.
*Model 4771HY, ratings are for 4 gpm at 1000psi.

 

Series 4WP2 and 4WP2T
Worm Gear Power Winches

Up to 2000 lb capacity
  • 115 Volt Single Phase Electric Motor includes
    power cord with grounded plug and a momentary
    contact-type push button pendant control
    on a control cord.
  • Machine Cut Worm Gears provide accurate
    operation and long lasting service.
  • Enclosed Oil Bath provides continuous
    lubrication of gears to minimize wear. Oil
    seals keep oil in and dirt out.
  • Internal Mechanical Brake provides positive
    load control for lifting and lowering operations.
  • Ball Bearings and self-aligning bronze bearings
    provide smooth and efficient operation.
  • Pressure Plate on series 4WP2T8 only, applies
    pressure to drum and wire rope to help maintain
    uniform winding.
  • Dual Function Cable Anchor for quick disconnect
    of wire rope with swaged ball fitting, or
    recessed cable anchor with set screw for wire
    rope with unfinished end.
  • Mounting Options include floor, wall, or ceiling.
    Cast Aluminum construction, for lightweight
    strength.
  • Corrosion Resistant durable paint finish protects
    against corrosion in harsh environments.
  • Large Diameter Drums minimize wear to the
    wire rope and help extend its life.
  • Clutch Model allows operator to manually disengage
    the drum to rapidly unwind wire rope.
  • Clutch models do not include pressure plates.
  • Two-year Limited Warranty
4WP2 and 4WP2T Series - Worm Gear Power Winches
8 -Vane Air Motor
Up to 2000 lb Capacity*
Our prices include  shipping within the lower 48 States.
Model No. Description Power Drum Width (in) Application Net Weight (lbs) Retail Our Cost
4WP2-PN Worm Gear Power Winch - 8-vane air motor with controls (mounted) pneumatic/Air 5.00 Brake Pulling or Lifting  85 $2,140 $2,033 Add To Cart
4WP2T8-2000-8 Worm Gear Power Winch - 8-vane air motor with controls (mounted) pneumatic/Air 8.00 Brake Pulling or Lifting  101 $2,370 $2,252 Add To Cart
4WP2TC-2000-8 Worm Gear Power Winch - 8-vane air motor with controls (mounted) pneumatic/Air 5.50 Clutch - Horizontal Pulling Only 106 $2,630 $2,499 Add To Cart
* See above load rating chart

For Unit Dimensions and Specification Click Here


 

ELECTRIC DRUM CONTROL SWITCHES
Drum control switches for 115 volt single phase motors up to 1.5hp, includes 8 ft power cord with grounded plug.
Please specify voltage, phase, and motor hp when ordering.  
Our prices include  shipping within the lower 48 States.
Model Number Description Voltage/Phase/Hertz with maximum rated motor hp Approx. Ship Wt. (lbs.) List Price Our Price
115/1/601 230/1/60 230/3/60 460/3/60
10L2A1 NEMA 1 to 1.5 hp to 2 hp to 3 hp to 3 hp 3 $375 $356 Add To Cart
10L7E1 NEMA1 to 1.5 hp to 3 hp to 5 hp to 7.5 hp 3 $526 $500 Add To Cart
                   
10L2A4 NEMA4 - watertight to 1.5 hp to 2 hp to 3 hp to 3 hp 7 $583 $554 Add To Cart
10L7E4 NEMA4 - watertight to 1.5 hp to 3 hp to 5 hp to 7.5 hp 7 $962 $914 Add To Cart
                   
10P1A46 6 FT Pendant control to 1 hp - - - 5 $312 $296 Add To Cart
 

HOME | SITEMAP | Hoist Comparison Chart | TERMS OF SALE | Contact Us | Resources | USED HOISTS | hoist & crane safety information | Manuals & Wiring Info | ABELL-HOWE | BUDGIT | COFFING | COLUMBUS MCKINNON | DUCT-O-WIRE | HARRINGTON | J.D. NEUHAUS | LUG-ALL | MY-TE | ROSS | TELECRANE | THERN DAVIT | VESTIL | WALLACE | Caldwell Group | GLEASON CABLE REELS